View source for Be quiet! Dark Rock Pro TR4

A [https://www.hardwareluxx.de/community/threads/sockel-g34-k%C3%BChll%C3%B6sung-als-ersatz-f%C3%BCr-noctua-nh-u12do-a3-gefunden.1240005/ post] on a computer forum by user ninioskl showed that it's possible to install this cooler on a G34 socket.

For installing this cooler on a G34 socket two hex standoffs for the included cooler mounting bridge are needed. The bottom part of the standoffs is #6-32 threaded. A distance of 18mm was measured between bridge and top of the silver threads from the backplate. Washers can help compensating the length of shorter standoffs.

On a [[ASUS_KGPE-D16|ASUS KGPE-D16]] using the standoffs and bridge, the coolers can only be mounted vertically as shown on [[Freebee]].
If you want to use two of these coolers both blowing the air upward and don't want the outer fan to cover the top PCIe slots, then a few additional steps are necessary: 
* the left cooler needs to be rotated 180 degrees 
* both of its fans must be mounted upside down 
* its 120mm Silent Wings 3 PWM outer fan needs spacers or must be replaced with another one to prevent the fan blade rubbing against the rubber spacers of the heat sink
* (its included 135mm Silent Wings PWM inner fan seems to rub on the rubber spacers sometimes too)

This cooler was discontinued around 2025.
For an overview of CPU coolers see [[Coolers]].

== External links ==
Datasheet: https://objects.icecat.biz/objects/mmo_62327038_1539763668_1197_28348.pdf

Manual: https://web.archive.org/web/20241003023102/https://www.bequiet.com/admin/ImageServer.php?ID=33ed5a38144@be-quiet.net&lang=1&force=true&download=true&omitPreview=true